Marble Machines Manufacturer in Turkey

We manufacture most needed marble machines like block marble cutting machines,automatic marble polishing machines and calibrating machines, slap polishing machines, chamfering machines, splitting machines, trimming machines, multidisk cutting machines, and different kids of machines.


KKM 725 BRIDGE MARBLE CUTTING MACHINE

Automatic Cutting: Sizes, which will be cut, entered in program by touch screen. After defining reference point of slaps, cutting process automatically starts. After the
first step, table rotates 90 degrees and other sizes entered in program to be cut.. During automatic cutting hydraulic breaks fixed the bridge from the both end due to
increase cutting sensitiveness. Linear bearings are used on slide ways of Bridge and Cabin movements. Encoder system reads the position of bridges sensitively.
Tilting and Rotating Table: Table can rotate 360 degree by it’s around and there is a hydraulic locking system for table at 30, 45, 60, 90,120, 135,150, 180,210,
225,240, 270, 300, 315,330, 360 degrees. Table rotates by reduction motor and tilt up with two hydraulic pistons. Encoder system reads the position of table in degree
which helps sensitive table rotation. Table tilting degree is max. 70 degrees.
Angular Cutting: 0 – 45 degree cutting. Adjustment is manual.
Standard Equipment
PINOMATIC EQUIPMENT : FESTO
ELECTRONIC EQUIPMENT : OMRON
ELECTRIC EQUIPMENT : TELEMANIQUE
PAINTING PROCESS : SAND BLASTERING, EPOXY, CONTROL, EPOXY, ACRALIC PAINT
DOCUMENTATION : USER MANUEL, DRAWINGS FOR CONCREATE, AIR, WATER AND ELECTRICITY
BEARINS : FAG, SKF, INA

Here Above: BEM 2x350 - Double Cross-Cutting Machine

Technical Data	BEM 2x350
Max. Cutting width - mm	650
Number of Cutting Discs -Piece.	2
Diameter of Cutting disc - mm	350
Max.cutting thickness- mm	40
Cutting disc motor power- Kw	5,5
Bridge moving motor power - kw	1,5
Total electrical power - Kw	12,5
Oweral dimension - mm	3100-1450-1550
Machine weight - Kg	1850

Here Above: 6x630 Horizontal Splitting Machine

Technical Data	YTYM 6x630
Max. Working width - mm	630
Min/Max. Discs diameter - mm	725 / 900
Number of discs - Piece.	6
Min/Max. Discs diameter - mm	2650-750-850
Max.working thicknes- mm	100
Belt wideness - mm	510
Belt motor power - kw	1,5
Max. Belt speed - m/min	0/4,5
Bridge moving motor power - kw	01.oca
Necessity of water (4 bar))- lt/min	300
Discs motor power - Kw	22
Total electrical power - Kw	135
Overall dimensions (length-heigth-width) - mm	6700-2200-2400
Machine weight - Kg	7300

Here Above: 4x480 Horizontal Splitting Machine Technical Data YTYM 4x480 Max. Working width - mm 460 (max 480) Diameter of Discs- mm 625 / 725 Number of Cutting Discs - Piece 4 Max. Working Thickness- mm 100 Belt widht - mm 370 Disc Motor Power - Kw 22 Belt Motor Power- kw 1,5 Bridge Motor Power - Kw 0,55 Total electrical power - Kw 90 Belt Speed - m/min 0/4,5 Necessity of water (4 bar)- lt/min 150 Overall dimensions (length-heigth-width) - mm 4800-2200-1900 Machine weight - Kg 4700

Here Above: 4x480 CE Horizontal Splitting Machine Technical Data YTYM 4x480 CE Min/Max. Discs diameter- mm 625-725 Max. Working width - mm 480 Max.working thickness - mm 100 Number of discs - Piece. 4 Discs motor power - Kw 22 Belt motor power - kw 1,5 Bridge moving motor power - kw 0,55 Belt wideness- mm 370 Max. Belt speed - m/min 0/4,5 Necessity of water (4 bar))- lt/min 150 Overall dimensions (length-heigth-width) - mm 4800-2200-1900 Machine weight - Kg 4700 Total electrical power - Kw 90

Here Above: TRM 2 - Marble Trimming Machine

Here Above:FPM 4 - Marble Tile Chamfering Machine

Technical Data	FPM 4	FPM 2+4	FPM 4+8
Working Width - mm	200-600	200-600	200-600
Max Thickness - mm	40	40	40
Number of Polishing Heads -Piece.	-	4	8
Number of Calibrating Heads -Piece.	4	2	4
Polishing Motor Power- Kw	1,5	1,5	1,5
Calibrating Motor Power- Kw	2,2	2,2	2,2
Rotation table motor power - Kw	1,5	1,5	1,5
Overall dimensions (length-heigth-width)- mm	6900-1800-1700	6900-1800-1700	6900-1800-1700
Machine weight - Kg	5950	6150	6400

Here Above: OPCM Slab Marbel Polishing Machine

Technical Data	OPCM 4	OPCM 6	OPCM 8
Working Widht - mm	2000	2000	2000
Working Thickness - mm	10/100	10/100	10/100
Number of polishing heads - Piece.	4	6	8
Polishing Disc Diameter - mm	500 (550*)	500 (550*)	500 (550*)
Polishing Motor Power- Kw	7,5 (11*)	7,5 (11*)	7,5 (11*)
Belt width - mm	2100	2100	2100
Bridge movement motor power - Kw	4	4	4
Total electrical power - Kw	36,2	52	67
Overall dimensions ( height-width-length) - mm	6400-3150-2350	7500-3150-2350	8600-3150-2350
Machine weight - Kg	14000	15500	17000

Technical Data	OPCM 10	OPCM 12	OPCM 14
Working Widht - mm	2000	2000	2000
Working Thickness - mm	10/100	10/100	10/100
Number of polishing heads - Piece.	10	12	14
Polishing Disc Diameter - mm	500 (550*)	500 (550*)	500 (550*)
Polishing Motor Power- Kw	7,5 (11*)	7,5 (11*)	7,5 (11*)
Belt width - mm	2100	2100	2100
Bridge movement motor power - Kw	5,5	4+4	5,5+5,5
Total electrical power - Kw	84,5	102	120
Overall dimensions ( height-width-length) - mm	9700-3150-2350	10800-3150-2350	11900-3150-2350
Machine weight - Kg	18500	20000	21500

Technical Data	OPCM 16	OPCM 24
Working Widht - mm	2000	2000
Working Thickness - mm	10/100	10/100
Number of polishing heads - Piece.	16	24
Polishing Disc Diameter - mm	500 (550*)	500 (550*)
Polishing Motor Power- Kw	7,5 (11*)	7,5
Belt width - mm	2100	2100
Bridge movement motor power - Kw	5,5+5,5	5,5+5,5
Total electrical power - Kw	135	195
Overall dimensions ( height-width-length) - mm	13800-3150-2350	15200-3150-2350
Machine weight - Kg	25000	31000

*Optional

Here Above: CEK - Hammer Machine

MKS 80 BLADES GANG SAW MACHINE
MANUEL WORKING
Manuel cutting allows you to cut a block(s) into the slabs by using the machine without using the
sensors such as slab broken sensor, wheel revolution sensor, height sensor, water pressure sensor but
except switches. Due to the fact that you are able to cut the blocks into the slabs with the desired
speed, you will have chosen from the potans on the electrical box.
Cutting Speed can be adjustable with a potans.
AUTOMATIC WORKING
As you select the Automatic mode working, the machine works fully automatic. First you enter the
block dimensions then you should select 3 sections on the blocks;
1st Section; the section where the cutting blades just enter into the block
2nd Section; the section where you can adjust the cutting speed with the potans
3rd Section; the section where the cutting blades go out from the block
Cutting Speed is less fast at the section 1st and 3rd not to damage the cutting blades. The distance the
cutting blade goes less fast is entered to touch screen numerically through the control panel by an
operator. During automatic cutting process all the sensors are on.
Slap Broken Sensor; It automatically stops the machines if any slap is broken during cutting process
Revolution Sensor; It automatically stops the machine if the flywheel revolution is less than the normal
Water Sensor; It automatically stops the machine If there is no water come
Height Sensor; It automatically stops the machine If block carrying trolley is not go up
If you stop the machine during automatic cutting process and you want to start cutting again, the
block carrying trolley automatically go down 2 cm before cutting process starts, not to damage the
cutting blades.
There is a brake to stop the machine immediately in amercing situation
Belt life is longer because between the pulley and the main motor is not connected to each other
directly
All the critical parts used on the machine are specially selected materials and operated carefully.
PLC system is used on the machine (Brand: OMRON)
Electrical panel and the machine is suitable with CE standards
Machine is delivered with all the necessary documentations such as Manuel, Electrical Drawings ....etc.
All the metal sheets are sand blustered and applied 2 times epoxy and acrylic paint So the machine
has a long life paint quality.

Here Above: BEM 350 - Cross-Cutting Machine Technical Data BEM 350 Max. Cutting width - mm 650 Diameter of Cutting disc - mm 350 Max.cutting thickness- mm 60 Cutting disc motor power- Kw 7,5 Hydroulic motor power- Kw 1,5 Total electrical power - Kw 9 Water requirement - lt/min 25 Oweral dimension - mm 3800-2200-1850 Machine weight - Kg 2100

Here Above: CTE 450 - Multiple Discs Cutting Machine

Technical Data	CTE 450
Number of cutting head - Piece.	3/38
Diameter of cutting head - mm	300
Working thickness - mm	8/40
Working widht - mm	450
Motor power of cutting head - Kw	11
Belt motor power - Kw	1,5
Belt Widht - mm	480
Necessity of water (4 bar ) - lt/min	100
Total electrical power- kw	12,5
Overall dimensions - mm	2400-1600-1200
Machine wight - kg	1200

For Other Marble Machines which we manufacture
Please Do Not Hesitate To CONTAC US

You Will Get:
Quality Machines,
Quality Service,
Reasonable Prices,